BAU15S (1156) 15mm bayonet base 12 volt DC AMBER.
Standard single contact pin on the base and same height with 30° offset side locating pins.
Quality Samsung 5050 LED delivering 400 lumens.
Canbus - no resistors required.
Used as a standard replacement for a 21w incandescant BAU15S automotive indicator bulb.
Overall Length - 42mm
Overall Width - 20mm
Protrusion from socket - 24mm
LED type - 30 x Samsung 5050 SMD
Canbus - YES
Quantity used - 6x4 on sides and 6 on top
Lumens Output - 360 for AMBER
Consumption - about 4w
Voltage - 12vDC
Changing over to LED indicator bulbs can be a challenge for some cars.
Bulb out warning systems can be present on brakes, reverse and indicator bulbs.
These rely on seeing a preset load passing through the connection.
In most cases it's 21w at 12vDC.
For indicators - in traditional flasher cans (those things that make the indicators flash) they need to have that 21w passing through the connection to open and close the contacts.
So there needs to be something that either goes around that requirement for a 21w load (Electronic Flasher Cans) or something else that artificially creates a load to make that can open (Resistors).
We have both Electronic Flasher Cans and the right size Resistor (6Ohm) to overcome this problem.
Universal 3 pin Electronic Flasher Cans such as ours can be troublesome to fit at times with their wiring so get back to us we have had some experience with the different types.
Also known as:
Email us or call us on 0740962152 to find the bulbs for your car.
We need Make, Model, Year and preferably Series.