LED board 80mm square 12vDC - COOL WHITE
36x5050 SMD LED mounted on a 80mm square PCB board.
Cool White is primarily a work light (kitchen, bathroom, shed, work bench etc).
Even though they use roughly the same amount of power the Cool White is about 10% brighter than Warm White due to the colour temperature (6000k for Cool White and 3000k for Warm White).
Please Note - These 80x80mm boards are suitable for 12 volt systems only.
For 24v use - you can series connect 2 of the 80x40 boards(2x12vDC) to acheive 24v use due to the fact that there are now 2 LED drivers powering the unit.(80x80mm outcome). (Please do not cut between the inline driver and the LED board).
An efficient replacement for incandescent lamps in situations where the LED board can be laid directly on top of the diffused lens.
These boards generate virtually no heat and can be fixed using double sided tape, a small blob of silicon sealant or some other method.
All of the circuitry is in line in a shrink-wrapped section about 40~50 mm back from the board.
Suitable for 12vDC systems (even under charge).
Operating voltage range - 8~30vDC (12v only recommended due to the higher current demand)
Current draw at 12vDC - 760 milliamps
Luminous flux - 468lm for the Cool White
Kelvin temperature - 3000K (Warm White) and 6000k (Cool White)
Viewing Angle - 120°
Size of PCB board - 80x40 mm
Total thickness of PCB including LED - 3 mm
Thickness of PCB board - 1.6 mm