Latest technology H7 LED headlights set using A Grade Philips ZES chips.
Fanless copper LED board design.
Inbuilt EMC Canbus (Error Cancelling) function - for overcoming error signal issues.
Non-polarity conscious - will operate on negatively or positively earthed systems.
No relays, capacitors or extra wiring required.
0.1 second response time.
No RF interference for your radio.
LED type - Philips Lumiled "A" Grade ZES
LED quantity - 8
LED board - Copper
Input voltage - 12v or 24v DC
Watts Used - 30~40w
Lamp body - Aircraft Grade Aluminium
Protective Class - IP65
Colour Temp - 6000K +- 500k
Lumens - 4000lm
Working Temp - -40C to 105C
Working Lifetime - >30,000 Hours
Approvals and Certificates held by manufacturer - CE, ISO9001, ISO4001, ROHS.
In Australia we know about poor headlights.
The Falcons and Commodores back in the 80s had horrible headlights.
When we started back in 2003 LED headlights were just a concept and only in the last 12 months have some big leaps been made forward in lumens (light output) technology.
Changes in design to the reflector and projector lamp bodies themselves have also enabled beam angles to improve greatly.
LED headlights don't warm up, they're instantly on.
They draw about 50% less current than halogen bulbs yet are much brighter.
Colour temperature is 6000k - better than halogen bulbs at 4000k.
Daylight itself is around 6500 K.
Incidentally, the human eye sees colour temperatures of 4000k as artificial.
Inside the bulb - the board that the LED's sit on is made from copper which is much cooler than other LED headlight conversions.
The copper board construction eliminates the need for a fan.
The body itself acts as a heatsink also and is made from aircraft grade aluminium to further reduce heat buildup.
IP65 means the headlight can put into water for no more than half an hour at no more than 1 metre.
Do LED headlights work successfully with projector lamps?
Generally not, mainly because LED lamps are confined to a rather tight beam and projector lamps require a 360° viewing angle to work properly i.e. to collimate the beam down to the required tight projector lamp angle.
This results in an intense spot of too narrow light.
Projector lamps are an improvement on the reflector design.
LED headlights still have a place with reflector lamp housings however.
The beam on LED headlights are naturally tight and the colour is right.
Therefore they appear sharper and brighter in reflector headlights than standard halogen bulbs.
Although HID lamps will be brighter than LED set up against the wall the the LED will actually throw a beam slightly further than HID.
LED headlights used in reflector lamps will give less dazzle to oncoming traffic than traditional halogen bulbs.