LED board 80mm square 12vDC - WARM WHITE (3000K)
36x5050 SMD LED mounted on a 80mm square PCB board producing 400 lumens at 3000k Colour Temperature.
At this size Warm White produces a large amount of light and is excellent for large light fittings.
Warm White produces an excellent ambient light much preferred by the ladies.
The viewing angle of the light is all round and will not produce spots on the ground.
Please Note - These 80x80mm boards are suitable for 12 volt systems only.
For 24v use - you can series connect 2 of the 80x40 boards(2x12vDC) to achieve 24v use with an 80x80mm outcome.
Please do not cut between the inline driver and the LED board.
An efficient replacement for incandescent lamps in situations where the LED board can be laid directly on top of the diffused lens.
These boards generate virtually no heat and can be fixed using double sided tape, a small blob of silicon sealant or some other method.
You can attach the LED board straight to a hard surface as there is actually nothing under the board apart from the wire running away from the centre.
All of the circuitry is in line in a shrink-wrapped section about 100 mm back from the board.
Suitable for 12vDC systems (even under charge).
Operating voltage range - 8~30vDC (12v only recommended due to the higher current demand)
Current draw at 12vDC - 760 milliamps
Luminous flux - 400 lm for Warm White and 500lm for the Cool White
Kelvin temperature - 3000K (Warm White) and 6000k (Cool White)
Viewing Angle - 120°
Size of PCB board - 80x40 mm
Total thickness of PCB including LED - 3 mm
Thickness of PCB board - 1.6 mm