Queries/Phone Orders – (07)40962152
G4/MR11 LED bulb 48×3014 SMD COOL WHITE 280lm – #1981/24
This is a 24v version – for 12v see here.
Dedicated 24v LED bulb – not a multi-voltage bulb – no risk of radio interference or sudden failure at 24vDC.
Mounted inside a silicone housing for waterproofing of the bulb contents.
We cant waterproof the contact pins so they will still rust eventually if exposed constantly to water.
Will operate on 12vAC if required.
Designed to fit into small openings, this G4/MR11 insert has a very low heat footprint.
ROHS compliant along with other standard industry certification.
Replaces this glass MR11/G4 bulb in horizontal fittings and applications.
Operating voltage – 24vDC
Total Length – 37mm including pins
Width – 13mm
Material – Silicone
Weight – 3.3g
Lumens output – 280lm
LED used – 48×3014 SMD
Current control – constant current driver
Viewing angle – 360°
Colour – Cool White 6000k
IP rating – 65
Life expectancy – 50,000 hours
What is the difference between Warm White and Cool White?
Warm White has a pleasant incandescent tone to the light whereas Cool White is a plain paper White.
The human eye naturally doesn’t see Warm White quite as bright as Cool White.
A Warm White bulb has about 90% of the lumens efficiency of a Cool White unit.
The bad news ends there for Warm White bulbs.
Over the years we’ve seen a slow transition towards Warm White mainly due to the fact that Cool White got itself a black eye from the early LEDs going blue tinged.
In short – ladies far prefer Warm White to Cool White.
The men prefer Cool White as it is a slightly brighter work light.