Our 12v LED light bar can be operated on any 12v DC or 24v DC supply.
Mounting clips and screws included.
Gang join/daisy chain using connector provided.
12v LED light bar FEATURES
- Width – 25mm
- Height – 35mm
- Length – 300mm
- LED used – 24×2835 Epistar SMD LED
- Lumens – 300
- CRI – 80
- Input Voltage – DC12v~24v
- Driver – IC Constant Current
- Current (12vDC) – 410 mA
- Watts per tube – 5w
- Colour Temp – 6000k Cool White
- Beam Angle – 160º
- IP Grade – 44
- Working Temp – -20 to +55
- Materials – Aluminium and PC
- PC cover – Milky White
- Warranty – 12 months
The 12v LED light bar comes with 2 mounting clips allowing for concealed fitting of the bar to any surface.
Each of the clips have a hole which allows for connecting a flathead screw to any surface.
Once the clips have been screwed in, the lightbar then can be connected to the clips.
The “driver” powers the LED’s at a sustained set current allowing for changes in voltage coming in.
On boats, motorhomes etc the voltage can get a bit hows-your-granny and the lightbar will easily handle these fluctuations.
The 300mm 12v LED light bar will replace any 300mm fluorescent fitting in light output.
It can take reasonable splash of water but please don’t immerse it.
If it does get dunked dry it out thoroughly with the end caps removed then power it up.
If you are going to leave it outdoors place some silicon on the 2 end caps and it will be fine.
Standard LED Shop Australia 12 month warranty on these (as with all our product).
Can be used in cold rooms and freezer rooms.
We expect a serviceable life of between 50,000 to 100,000 hours for the 12v LED light bar.
Email us or call us on (03) 7068 9150 to find out about our Concierge Service; for $55 we will help you find the specific bulbs for your car Make, Model, Year and Series.