12v 80x40mm Board AMBER 18×5050 LED

$9.90 each inc GST

LED board Amber/Yellow Indicator 12 volt 80mm x 40mm with 18 of the 5050 SMD. Ideal for replacing hard to find bulbs.

In stock (can be backordered)

Description

LED Amber board 80x40mm 12v – suitable for indicators, bug-resistant lighting.
18×5050 AMBER LED mounted on a 80x40mm PCB board.

Economical and easy replacement in situations where hard-to-find AMBER bulbs can be replaced with an efficient LED board.
Suitable for 12 volt and 24 volt systems – (Please do not cut between the inline driver and the LED board).

An efficient replacement for incandescent lamps in situations where the LED board can be laid directly on top of the diffused lens.
These boards generate virtually no heat and can be fixed using double-sided tape, a small blob of silicon sealant or some other method.

It’s not set up to flash – it will flash (see below) however if you wire it into your automotive system to replace an existing bulb.
All of the circuitry is in line in a shrink-wrapped section about 50mm back from the board.

Suitable for 12v and 24vDC systems (even under charge).

Operating voltage range – 8~30vDC
Current draw at 12vDC – 380 milliamps
Luminous flux – 240 lm
Kelvin temperature – 6000 K.(Cool White)and 3000K (Warm White)
Viewing Angle – 120°
Size of PCB board – 80×40 mm
Total thickness of PCB including LED – 3 mm
Thickness of PCB board – 1.6 mm

 

SKU 0068

Email us or call us on (03) 7068 9150 to find out about our Concierge Service; for $55 we will help you find the specific bulbs for your car Make, Model, Year and Series.

Additional information

Dimensions 80 × 40 × 8 cm

You may also like…